Kingtronics Blog

Kingtronics newly compiled passive components full Range Catalog, including our HOT best seller product with excellent quality and price.

Welcome check & contact Kingtronics sales team for further best quotation.    info@kingtronics.com
Kingtronics passive components full Range Catalog : https://www.kingtronics.com/pdf/Kingtronics-passive-part-full-Range-Catalog.pdf
Kingtronics youtube channel for more product information : https://www.youtube.com/c/Kingtronicskt

☆Aluminum Electrolytic Capacitor—GKT:
Polymer Solid type, Radial Type, SMD Type, Axial Type, Snap-in, Lug and Screw Type

☆Super capacitor—DKT:
Coin-type, Radial type, Snap-in and Screw Type, Combined Type (Double Layer)

☆Film capacitor—FKT:
Box Type Metallized Polyester Film Capacitor, Polypropylene Film Capacitor, X2 Metallized Polypropylene Film Capacitor

☆SMD 3mm Chip Ceramic Trimmer Capacitor--KKT

☆Multilayer Ceramic Capacitors
MKT-Radial Type,
AKT -Axial Type,
LKT -SMD Type Low Voltage
HKT -SMD Type High Voltage
BKT -SMD Type High Q Low ESR RF

According to IEC 60384-14, capacitors are divided into X capacitors and Y capacitors
1. X capacitance refers to the capacitor between L and N
2. Y capacitance refers to the capacitor between L-G/N-G. (L=Line, N=Neutral, G=Ground)

The capacitance of X is divided into X1, X2 and X3. The main differences are as follows:
1. X1 high voltage resistance is greater than 2.5kV, less than or equal to 4kV
2. High voltage resistance of X2 is less than or equal to 2.5kV
3. High voltage resistance of X3 is less than or equal to 1.2kV

The capacitance of Y is further divided into Y1, Y2, Y3 and Y4. The main differences are as follows:
1. Y1 high voltage resistance is greater than 8 kV;
2. Y2 resistance to high voltage greater than 5 kV;
3. Y3 resistant to high pressure N/A;
4. Y4 high voltage resistance is greater than 2.5kV

Kigntronics website:https://www.kingtronics.com/

These capacitors are based around the use of a polyester dielectric. As with any capacitor, polyester capacitors have their own characteristics. This means that they are suited to some applications more than others. Mylar capacitors have low levels of moisture absorption.

Mylar is an excellent electrical insulating material, with a high breakdown voltage, very high DC resistance, DC blocking and  Ultra-low ESR.
FKT-MP Mylar Polyester Film Capacitor: https://www.kingtronics.com/pdf/FKT-MP.pdf

Kingtronics join in a charitable donation over 20 years, and some beneficiary always write to us, We are also happy to receive feedback whatever about study or life. Please keep in touch!

We are doing our best and using our voice to create as much positive change, hope the society will take more care of vulnerable Groups.

We know we have a good heart and we feel like to making the help for some adolescent who is left-behind children. If you have the empathy to empathize with a good heart, probably you can share the same kind of morals I do.

Chinese New Year is approaching.
Kingtronics team would like to thanks the continuous support of new and regular customers.

We will endeavor to provide your with good quality production, favorable prices and excellent services in coming years.
Kingtronics Production lines will start around 3-weeks-holiday from 20th January.

Different production lines will have different schedule.
The lead time may be extended because of CNY holiday.

If any demand recently, please feel free to share earlier.
Thank you !

With the changing economic landscape and evolving consumer behavior, industries will continue their path of digital transformation. This means that the demand for semiconductors will increase. This prompts chipmakers and governments worldwide to work hard in closing the gap.

TSMC, the world’s leading semiconductor foundry, has pledged to invest $100 million to increase capacity over the next three years. Samsung and SK Hynix have teamed up with the South Korean government and spent $451 billion for the same venture.

Members of the European Union have their plans as well. The UK government is yet to reveal what they are precisely, but the idea is to help the local chip sector grow its capacity in their supply chains.

Both private and public sectors are determined to end the chip shortage. However, many challenges (policy making, local and international covid restrictions, etc.) need to be addressed before things get going.

Industry experts were optimistic at first, expecting the chip supply to recover by the end of 2021. Historically, demand for semiconductors declines every fourth quarter of the year, which should give chipmakers a chance to catch up.

That is not the case so far. It appears that the decrease in demand is not big enough for foundries to make a significant dent in the current imbalance.

They were forced to revise their initial opinion, and they now fear that the chip shortage could last until next year, maybe even until 2023.

We have to look at several factors that created this shortage tsunami that blindsided everyone. We have broken them down into the following: supply, demand, unfortunate events, and poor decision-making.

Surge in Demand
When Covid-19 restrictions rolled out worldwide, stay-at-home mandates were the norm to prevent the transmission and spread of the virus. Everyone shifted to work from home setups, businesses went online, and messaging applications were downloaded immediately. Consequently, demand for additional electronic gadgets skyrocketed. People upgraded their laptops, purchased new desktops, more tablets, etc., to meet the requirements of the current situation.

This bottlenecked supply chains, as retailers did not prepare for the sudden increase in demand for new requirements. Add the existing projects in their pipelines, and you have the perfect recipe for a global semiconductor disaster.

Bad Luck
Aside from facing COVID-related challenges, some of the biggest foundries in the world were hit by a series of unfortunate events that disrupted their production process even more.

On March 19, an electric overload burned down 600 square meters of the Renesas plant in Naka, one of the most prominent players in the global chip market. It destroyed 23 machines and rendered other areas in the facility temporarily unfit for use.

The plant was running to total capacity again by June, but the damage has been done.

In Taiwan, the worst drought in recent memory threatened to make the chip shortage even worse. Producing chips require tremendous amounts of water, which the drought is making impossible to do. In Texas, winter storms forced some of the country’s only chip plants to stop production.

Still, there are only a handful of big chip manufacturers globally, making the semiconductor industry more vulnerable.

Kingtronics’ Radial & Chip MLCC enjoy good reputation of price and high quality on the market, and our parts can replace below brands with very competitive L/T,  about 3~5 weeks!

Below are the cross table, welcome your inquiry to let us help you reduce costs!

MLCC Cross Reference

Kingtronics provides wide variety and complete passive component production line, dedicating to producing the following capacitor series with excellent quality, reasonable lead time and price. Welcome your inquiry for more information.

☆Aluminum Electrolytic Capacitor--GKT
Polymer Solid type, Radial Type, SMD Type, Axial Type, Snap-in, Lug and Screw Type
E-cap product catalog: http://www.kingtronics.com/pdf/Kingtronics-Aluminum-Electrolytic-Capacitor-Leaflet.pdf

☆Multilayer Ceramic Capacitors
MKT -Radial Type,
AKT -Axial Type,
LKT -SMD Type Low Voltage
HKT -SMD Type High Voltage
BKT -SMD Type High Q Low ESR RF

☆Tantalum Capacitors
TKT -Radial Type
CKT -SMD Type
EKT -SMD Type Low ESR
PKT -SMD Type Solid Polymer

☆Super capacitor--DKT
Coin-type, Radial type, Snap-in and Screw Type, Combined Type (Double Layer)
product video: https://www.youtube.com/watch?v=yXIbjov30aM

☆SMD 3mm Chip Ceramic Trimmer Capacitor--KKT
Product video: https://www.youtube.com/watch?v=Men9BCDlODk&t=1s

Hello Ms. King,

I’m reaching out because you were newly approved for the Digi-Key Marketplace program. The 1st step to getting on boarded, is providing the product information for the parts you’d like to sell on our website.

We thought we’d try and help you out by pulling some off your website to have you review and approve.

Are the products in the attached spreadsheet ok to add to your marketplace store offering?

Please let me know and I’ll begin getting them loaded, and you moving through the process!