Kingtronics Blog

SMA-J Fast Recovery Rectifier RS1A-RS1M

FEATURES:
‧ For surface mounted applications
‧ Fast switching for high efficiency
‧ Low reverse leakage
‧ Built-in strain relief,ideal for automated placement
‧ High forward surge current capability
‧ The plastic package carries Underwriters Laboratory
‧ Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere
‧ High temperature soldering guaranteed: 250 C/10 seconds at terminals
‧ Flammability Classification 94V-0
‧ P/N: RS1A, RS1B, RS1D, RS1G, RS1J, RS1K, RS1M

Kindly please check more items and datasheet from below links:

SMA-J Fast Recovery Rectifier RS1A-RS1M
SMA Fast Recovery Rectifier RS2A-RS2M
SMB Fast Recovery Rectifier RS2A-RS2M
SMB Fast Recovery Rectifier RS3A-RS3M
SMC Fast Recovery Rectifier RS3A-RS3M
SMC Fast Recovery Rectifier RS5A-RS5M

(1)It is recommended that capacitors should be used at a voltage less than the rated voltage.
It is also recommended to properly derate the voltage to improve operating reliability. 

(2)Customers in the product installation to avoid the occurrence of individual products locally over temperature conditions (≥260 ℃), and to avoid direct contact with high temperature soldering paste tantalum capacitor body.

(3) In low impedance circuit applications such as power supply circuits, the failure rate may increase due to inrush current.
Additionally, if a short occurs within the capacitor, burning may possibly occur.
Therefore, sufficient voltage derating is recommended. Use voltage should be within 30% -50% of the rated voltage, thereby improving the reliability of the circuit, in order to avoid the adverse effects of inrush current.

For more products information please check:
http://www.kingtronics.com/mlcc-capacitors/chip-tantalum-capacitors.html